Mach3 is great CNC control software if you have a printer port, but what if your PC has not? If you have a spare PCI slot, you may use a PCI/LPT card. But for optimum performance and ease of use, just connect this USB motion controller that will work out of the box without needing to reconfigure pin assignement, since it's configured with standard port and pin assignement in mach3 and has a standard DSUB25 female header with printer port pinout for you favorite CNC board.
System performance will increase since stepping jitter accuracy is better on a dedicated CPU instead of using main PC CPU, which is releaved from calculating and operating stepping tasks and is free for GUI interaction.
Main features:
- Powerful CPU inside, controls up to 6 axis in coordinated movements
- USB mini connection to host PC (USB cable included)
- Printer port SUB25 connector with same pinout you're used to
- Works with Mach3 software via dedicated plugin
- Step frequency up to 100kHz
- Fast communication and large data buffer for reliable, robust and stable operation
UC100 Motion Controller Upgrade your LPT controlled CNC machine. The UC100 motion controller is very small addition to your CNC system that has the potential to significantly improve the performance of your setup. The UC100 is Mach3 Compatible and can provide a full USB replacement for your LPT driven system.
Uc100 Cnc Motion Controller Driver Updater
Please note this is NOT a usb-to-printer adapter. This will work with Mach3 and will not work with printers. Conversely a usb-to-printer adapter will work with a printer, but won't work with mach3.
Uc100 Cnc Motion Controller Windows 10 Driver
I was wondering if any one uses an UC100 with their CNC. I have a Stepcraft CNC mill that I use a UC100 with Mach3. It works well but I would like to run LinuxCNC rather than a Windows box as the windows machine was given up. I hope this is the right sections to ask this question. I did a quick search on this forum and found no information. USB Motion Controller. Automatic Firmware checking and Firmware update. Motion control on up to 6-axis (X, Y, Z, A, B, C). Configurable maximum stepping frequency, the options are 25kHz(with 20usec pulse length), 50kHz(with 10usec pulse length), 100kHz(with 5usec pulse length). CNC USB MACH3 100Khz Breakout Board 4 Axis Interface Driver Motion Controller US. Original Uc100 CNC USB Motion Controller for Mach3 USB to.
댓글